文献类型：期刊文献

中文题名：正交设计结合熵权法优选扶正屏风颗粒成型工艺

英文题名：Optimization of Forming Process of Fuzheng Pingfeng Granules by Orthogonal Design Combined with Entropy Weight Method

作者：张兆芳[1,2,3];王耀鹏[1,2,3];宋治荣[1,2,3];辛二旦[1,2,3];燕玉奎[1,2,3]

第一作者：张兆芳

机构：[1]甘肃中医药大学附属医院,甘肃兰州730020;[2]甘肃省中药炮制及质控研究中心,甘肃兰州730020;[3]杨锡仓全国名老中医药专家传承工作室,甘肃兰州730020

第一机构：甘肃中医药大学第二附属医院

年份：2023

卷号：19

期号：11

起止页码：76

中文期刊名：亚太传统医药

外文期刊名：Asia-Pacific Traditional Medicine

基金：甘肃省科技支撑计划项目(20JR10RA337)。

语种：中文

中文关键词：扶正屏风颗粒;成型工艺;正交设计;熵权法

外文关键词：Fuzheng Pingfeng Granules;Molding Process;Orthogonal Design;Entropy Weight Method

摘要：目的:通过正交设计结合熵权法优选扶正屏风颗粒的成型工艺。方法:以颗粒的成型率、休止角、堆密度、溶化性为评价指标,测定颗粒的各个指标后,采用熵权法计算各指标权重,得到综合评分。结果:各因素对综合指标影响主次顺序为干燥温度>乙醇浓度>药辅比。扶正屏风颗粒的成型最优工艺为药辅比1∶1,乙醇浓度为90%,干燥温度为60℃。结论:采用熵权法可以用来优选扶正屏风颗粒的成型工艺,为批量化和标准化生产提供了理论依据。
Objective:To establish the molding process of Fuzheng Pingfeng Granules by orthogonal design combined with the entropy weight method.Methods:The molding rate,angle of repose,bulk density,and solubility of particles were used as evaluation indexes.After measuring each index of particles,the weight of each index was calculated by the entropy weight method,and the comprehensive score was obtained.Results:The order of influence of each factor on the comprehensive index was drying temperature>ethanol concentration>drug-to-adjuvant ratio.The optimum process was as follows the ratio of drug to auxiliary was 1∶1,the concentration of ethanol was 90%,and the drying temperature was 60℃.Conclusion:The Entropy weight method can be used to optimize the molding process of Fuzheng Pingfeng Granules.The experimental results provide a theoretical basis for batch and standardized production.